Snow fences
Program

The highlights of our snow fences

• As the pegs can be knocked in completely during erection, they are not subject to any bending moment. Despite being small and handy, they can be seated firmly – even in a ploughed field.
• Tensioning of the bracing ropes is carried out not by knocking the pegs deeper into the ground but by a patented rope tensioning system
• Cross tensioning need only is carried out on one side. The other side is properly tensioned automatically.
• Longitudinal tensioning ropes threaded in at the top and bottom prevents the snow fence from sagging and concurrently they are comply a theft protection of the weave.
• Rope tensioning systems on the bracing ropes make the erection and removal and any potential re – tightening far easier.
• The prevalent wind direction is unimportant when erecting the fence.
• The installation taken place in straight lines and not in zig-zag lines.
• Supporting posts integrated into the weave.
• Weave fastened to the supporting posts for the entire height of the weave with mat holding sheets.
• Anti-abrasion strips prevent the snow fencing mat from wearing on the galvanized posts.
• Because of the very high UV resistance of the weave it is not necessary to dismantle the system in the summer.
• Rope deflectors prevent abrasion of the galvanized surface of the supporting posts and protect the bracing ropes.
• The 4 accessories for erection and removal are not absolutely essential; however they speed up the process quite considerably.
• Because of the easy weighs and the easy installation the snow fencing system could be installing by one person alone.
• Because of the small pegs and small base plates, the snow fencing system is able to install in all kind of grounds. For example stony ground, soft ground, sandy ground etc.